Skip to main content

Anschutz Match 54.18- Metallic Silhouette Action - Newer (2000s)

$161.00 - $234.00
(No reviews yet) Write a Review
Selected Finish / Color is
Adding to cart… The item has been added

Description

Description:

Do you want a classy, sophisticated picatinny rail for your Anschutz tack driver? Need greater MOA to get out past 200 yards?

Tired of cheap aluminum rails getting beaten up, or shifting zero?

If so, our premium stainless steel or titanium scope mounts offer slopes up to 30 MOA, and do so with style. They will securely hold your expensive optics, and prevent point of impact shifts from ruining your shot.

Our scope mounts are proudly made in Idaho, on our state of the art CNC equipment. You have a choice between 17-4 Stainless Steel, or the ultimate: Grade 5 Titanium. That's right, the same material used in the SR71 Blackbird. Your rifle probably doesn't do Mach 3, or travel at 80,000 ft, but if it did, our bases can take it.

We hold the bases strictly to tighter tolerances than allowed under the Picatinny standard (MIL-STD-1913), ensuring complete compatibility with all Picatinny style, as well as Weaver style scope rings.

They are available in a natural, satin silver finish (bead blasted), or with an incredibly tough black finish called Cerakote.

Application:

Anschutz rimfire rifles using the Match 54MS (Metallic Silhouette) receiver in .22lr Includes variants of 54.18 Model. Please note that this receiver has a greater spread between holes #2 and #3 than the normal Match 54 action used in the 1710 and 1712 series rifles. *NOTE* Anschutz shifted the mounting hole pattern at some point between the mid 1980s, and the 2000s. Please see the photo showing the differences. This base is for actions like the lower one, with approximately 1/16" between the loading port edge, and the #3 screw hole. Please double check the following measurements to avoid purchasing the wrong base.

Specs:

Weight:Stainless: -- oz, Titanium: --oz Length: 5.788" Height: .410" Diameter: 30mm

Hole Spacing:

1st to 2nd: 0.500" 1st to 3rd: 4.000" 1st to 4th: 4.500"

** Each base ships with #6-48 alloy steel Torx screws, and a T15 Torx wrench. (#8-40 screws available upon request).